How to fix Frigidaire Oven F10 Error Code? A Step-by-Step Guide
by A Maria
Updated Apr 19, 2023
What is the Frigidaire Oven F10 Error Code?
Frigidaire electric ranges come with a built-in safety mechanism to prevent them from overheating and causing potential harm. These ranges have a specific broil temperature limit that should not be exceeded. If the broil temperature rises beyond this limit, the range's safety mechanism will activate, and an "F10" error code will appear on the display screen.
Once this error code is displayed, the range will automatically shut down, and there is no option to turn it back on until the issue is resolved. It is crucial to address this error as soon as possible to prevent any further damage to the range or potential safety hazards.
In case you come across an "F10" error code on your Frigidaire electric range, it's advisable to follow the troubleshooting steps mentioned in the manufacturer's instructions or seek assistance from a professional appliance repair service.
Cause of Frigidaire Oven F10 Error Code
Are you experiencing the frustrating "F10" error code on your oven? Before you start to panic and call a repair service, there are a few things you can check yourself to potentially solve the issue. One of the most common causes of the "F10" error code is a faulty oven temperature sensor.
To check this, disconnect the power to the oven and remove the back panel. Next, disconnect the wire harness from the temperature sensor and use a multimeter to test its resistance. A reading of fewer than 1,000 ohms or more than 1,300 ohms at room temperature indicates that the sensor needs to be replaced. If the sensor has no continuity, it also needs to be replaced.
If the temperature sensor checks out okay, the next step is to test the sensor wire harness. Remove the top back panel, plug the harness back into the sensor, and unplug the other end from the control board. Check the resistance through the harness and sensor and compare it to the previous reading. If the readings are the same and you are still getting the "F10" error code when trying to cook, the electronic control board may need to be replaced.
Before attempting any of these steps, it is important to always disconnect the power to the oven and refer to the manufacturer's instructions for your specific model. With a little troubleshooting, you may be able to fix the "F10" error code on your own and avoid costly repair bills.
How to fix Frigidaire Oven F10 Error Code?
How to fix Frigidaire oven f10 error code - FAQs
The "F10" error code indicates that the broil temperature has exceeded the safety limit on your Frigidaire electric range.
There are several potential causes of the "F10" error code, including a faulty temperature sensor, a malfunctioning electronic control board, or issues with wiring between the two.
If you encounter the "F10" error code on your Frigidaire electric range, it is recommended that you refer to the manufacturer's instructions for troubleshooting steps or contact a professional appliance repair service for assistance.
No, you should not use your Frigidaire electric range if it displays the "F10" error code. This error code indicates a potential safety hazard, and the range will automatically shut down to prevent further damage or harm.
To prevent the "F10" error code from occurring on your Frigidaire electric range, avoid using the broil function at excessively high temperatures. Additionally, make sure to perform regular maintenance and inspections on your range to identify and address any potential issues before they become major problems.