What is Lavadora Bosch Error E29? How to Fix It?
by Swetha P | Updated Apr 29, 2023
What is Lavadora Bosch Error E29?
"Lavadora Bosch" refers to Bosch washing machines in Spanish, where "lavadora" means washing machine. Bosch is a well-known brand that manufactures a variety of household appliances, including washing machines. If your appliance is showing an E29 error code, it may indicate that the sensor is not detecting the water fill of the unit or doing so too slowly.
To solve this issue, inspect the parts responsible for supplying water to your appliance. Start with the hosepipe, which could be blocked or twisted, preventing water from reaching the tank. Additionally, ensure that the hose is not lower than 50cm above the ground, where the tank is located. Check the filter located between the hose and valve, as it may be clogged with dust and dirt, which could also impede water flow.
Check the water pressure by dividing the hose and placing it into a sink to observe the water's flow. If the flow is weak and slow, turn the inlet valve. Even though rare, issues with the water sensor may also cause the E29 error, and it's worth examining. Another potential cause is a breakage in the AquaStop system of your High-Efficiency washer, which may not always be indicated by the E29 code.
Cause of Lavadora Bosch Error E29
Are you want to know the Cause of Lavadora Bosch Error E29? Here is the information provided, When the Bosch washing machine displays Error E29, it may indicate various causes, including a twisted or clogged water supply hose, a clogged water filter, low water pressure in the plumbing, pressure switch malfunction, or Aquastop failure.
It is important to check the water supply hose for any kinks or blockages and inspect the water filter for any dirt or debris that may be obstructing water flow. Additionally, verifying the water pressure and the pressure switch can help diagnose the issue. In some cases, the problem may be due to a malfunctioning Aquastop system, which may require repair or replacement. Check out How to Fix Lavadora Bosch Error E29 in the upcoming section.
Error E29 Lavadora Bosch
Lavadora Bosch Error E29: When a Bosch washing machine displays Error E29, it typically means that the sensor is unable to detect the water fill of the unit or is doing so too slowly. To solve this issue, it's necessary to inspect the parts that are responsible for the supply of water to the appliance.
Starting with the hosepipe, check for any blockages or kinks that may be preventing water from reaching the tank. It's crucial to ensure that the hose is not positioned lower than 50cm above the ground, where the tank is located. Error codes, including E29, can indicate various small and big issues with different manufacturers' washers.
How to Fix Lavadora Bosch Error E29?
When a Bosch washing machine displays the error code E29, the first thing to check is the water pressure in the tap. If the pressure is normal, inspect the water supply hose to the washing machine, which may have been squeezed or clogged. Cleaning the filter mesh at the entrance to the washing machine is also necessary, especially if the water quality is poor or contains rust.
If the above-mentioned reasons are not the cause of the E29 error, the pressure switch may be malfunctioning. In this case, the problem is not related to the sensor, but rather to the blockage of the membrane due to pressure in the switch. To check this, the top panel needs to be removed, and the round sensor to which several wires and a thin hose are connected must be located.
Disconnect the hose from the sensor and reconnect it, and gently tap on the pressure switch to return the membrane to its normal position. However, caution must be taken to avoid blocking the hose's pressure.
What is Lavadora Bosch Error E29 -FAQs
It indicates an issue with the water detector or intake system.
Check the water pressure in the tap.
A twisted or clogged water supply hose, a clogged water filter, low water pressure in the plumbing, a pressure switch malfunction, or Aquastop failure.
Unscrew the hose and check the filter mesh at the entrance to the washing machine, then clean it.