DirecTV Stream Box Not Working, How to Reset DirecTV Remote? Why is My DirecTV Stream Remote Flashing Blue?

DirecTV Stream Box Not Working

If your DirecTV Stream remote is not working properly, like showing a blinking blue light, not turning off the TV, or the volume buttons not responding, it's common as it gets older. If you're facing these issues, don't worry. This article is here to help. We'll show you how to reset, resync, or even get a new remote to make it work again.

So, if you're trying to fix problems with your DirecTV Stream remote, this quick and easy guide is just what you need.

Our comprehensive guides will help fix those stubborn tech glitches and get your devices running smoothly. You'll find solutions for all your gaming, apps, and error code issues on Fresherslive.

How to Reset DirecTV Remote?

Find the Reset Button

• Look for a small red button on the inside of your remote. It's usually located near the battery compartment.

Press and Hold the Reset Button

• Press and hold the red reset button till the light flashes.

Wait for the Lights

• While holding the button, you might notice some lights blinking on the remote. This is a sign that it's working.

Release the Button

• After a few seconds, let go of the reset button.

Replace the Batteries

• If your remote uses disposable batteries, it's a good idea to put in fresh ones at this point.

Repair the Remote (if needed)

• If your remote still isn't working, you might need to pair it again with your DirecTV device. Follow the instructions provided by DirecTV for this.

Test the Remote

• Try using the remote to see if it's working properly now. It should respond to your commands.

Remember, if you're not sure about any of these steps, it's always a good idea to refer to the user manual or contact DirecTV support for assistance.

Why is My DirecTV Stream Remote Flashing Blue?

When the blue light on your remote blinks, it's not a mistake. It means the remote is trying to connect to your TV.

If you haven't connected your remote to your TV before or if it somehow got disconnected, you'll see this blinking blue light. It's normal and just means the remote is ready to link up with your TV system.

Fixes for My DirecTV Stream Remote Flashing Blue

Resync the Remote - Blue/Purple Lights

• Press the Home button on your remote.
• Go to Settings > System > System Settings.
• Select Remote & Devices.
• Choose Program Your Remote.
• Pick either TV or Speaker System, depending on your device.
• Follow the prompts.
• Make sure you're close to the DIRECTV STREAM Box and pointing the remote towards the IR receiver. The remote lights will blink blue while pairing.

Ensure Batteries are Securely in Place - No Lights

• Take off the battery cover, remove the batteries, and put them back in. If everything works, you're good to go. In some cases, you might need to resync the remote.

Switch to IR (Infrared) Mode

• Some TVs don't support Bluetooth. That's okay, you can use Infrared:
• Hold down the Fast Forward (>>) and Rewind (<<) keys together.
• The remote will switch to IR mode during setup.

Unpairing the Remote

• If you're moving your DIRECTV STREAM Box to a new TV, you can unpair the remote:
• Press and hold the Dash and Diamond keys at the same time.

DirecTV Stream

DirecTV Stream, formerly known as DirecTV Now and AT&T TV is a suite of streaming television services available in the United States. Within this brand, there are three distinct services that share similar technology and infrastructure. The first, DirecTV Stream, originally launched as AT&T TV in March 2020, serves as the streaming counterpart to the traditional DirecTV satellite TV service.

This option is offered with a contract and can be bundled with other services, utilizing Android TV-based set-top boxes provided to subscribers. The second service, AT&T WatchTV, introduced in June 2018, caters to cord-cutters with a slimmed-down selection, omitting local and sports channels. Lastly, AT&T TV Now, previously DirecTV Now, was a direct-to-consumer offering launched in November 2016, allowing subscriptions without a contract. It was designed to compete with other over-the-top television services.

How to Use DirecTV Without a Remote Control?

Download the DirecTV App

• First, get the DirecTV App on your iOS or Android phone.

Open the App and Access Settings

• In the app, look for "Settings". It's usually represented by a gear or similar icon.

Select Remote Control

• In Settings, find and choose the option for "Remote Control".

Connect to the Same Wi-Fi

• Make sure both your TV receiver and your phone are connected to the same Wi-Fi network.

Choose Your Receiver

• From the list that appears, pick your TV receiver.

Note: Potential Issue with Grayed Out Receiver

• If you see your receiver grayed out, it could mean either it's not currently active or your device isn't on the same Wi-Fi network.

Follow Setup Prompts

• Once you've selected your receiver, follow the instructions that show up to finish setting up your phone as a remote.

Now, you can control your DirecTV with your smartphone

Brain Teaser: Find the Odd One in 10 Seconds

How to Hide Your Location on Snapchat? How to Turn Off Your Snapchat Location?

Optical Illusion: Can You Try to Find the Hidden Number in 10 Seconds?

• Next Article ››

How to Fix it When Your iPad Won't Turn On? Causes of an iPad Not Turning On

122 days ago

How to Hide Your Location on Snapchat? How to Turn Off Your Snapchat Location?

126 days ago

How to Fix Bosch Dishwasher Error Code E24? Know All Details Here

129 days ago

How to Make a Group Chat on TikTok? A Complete Guide

129 days ago

What Does ‘In a Group With Me’ Mean on Snapchat?

129 days ago