What is Samsung Washing Machine 4C Error, and How to Fix The Error?
by T Santhosh
Updated Mar 22, 2023
What is Samsung Washing Machine 4C Error?
When your Samsung washing machine displays the 4C or 4E error code, it means that there is an issue with the water supply. This can be caused by a blocked or kinked water supply hose. The good news is that this is a common issue and can be resolved with some troubleshooting steps. It's important to note that the 4C error can occur at the start of the washing process or during rinsing. If you encounter this error, you won't hear or see water pouring into the machine. However, at the end of the cycle, the soapy water will still drain out completely, but there won't be any flow of pure water.
To fix the 4C error code, start by checking the water supply hose for any kinks, bends or blockages. If you find any, straighten the hose or remove the blockage. If the hose looks fine, check the water supply valve to ensure it is fully open and functioning properly. If everything appears to be in order with the hose and valve, then there may be an issue with the water inlet valve or the electronic water level sensor. In this case, it's best to contact a professional technician for further diagnosis and repair. By following these steps, you can troubleshoot and resolve the 4C error code in your Samsung washing machine, ensuring it functions properly and delivers clean clothes with ease.
How to Fix Samsung Washing Machine 4C Error?
1. Check the water hose
When you encounter a problem with the water supply in your washing machine, it could be due to low water pressure or a low flow rate from the mains water supply to the machine. Essentially, this means that the water is not flowing into the machine with enough force. To ensure that the water pressure is optimal, it should be between 0.5bar and 8bar.
If you're experiencing this issue, you can try some troubleshooting steps to fix it. First, power off your washing machine and unplug it from the mains. Then, move the machine forward to access the water hoses. Check that there are no kinks or bends in the water hose that's connected to the machine, and make sure the hose is not damaged. This will ensure that the water supply is flowing freely into the machine without any obstructions. If you find any issues with the hose, replace it with a new one.
It's also a good idea to check the water inlet filters for any blockages. You can do this by removing the hoses from the machine and looking inside the inlet valves. If you find any debris or blockages, remove them and then reconnect the hoses. By taking these steps, you can troubleshoot and fix the problem with your washing machine's water supply, and get your machine working properly again.
2. Check the water supply
Ensure that the water tap connected to your washing machine is fully open. The water supply to the machine is crucial for it to operate efficiently. If the water tap is not fully open, the water flow to the machine may be limited, resulting in issues with the washing process.
To check the water tap, locate the valve connected to the water hose that leads to the washing machine. Once the valve is fully open, check the water flow by running the washing machine on a regular cycle. If the water supply is still not sufficient, you may need to check the water pressure or flow rate on your mains water supply to ensure that it is within the acceptable range.
3. Clean the water hose mesh filter
To ensure your washing machine continues to function properly, it's essential to clean the water hose mesh filter regularly. Over time, mineral deposits and debris can build up in the filter, causing water flow issues that could potentially damage your machine. Cleaning the filter at least twice a year is recommended to prevent such problems.
4. Clean the dispenser drawer
In some cases, a 4C error code may indicate a blockage in the detergent dispenser drawer. To fix this issue, you can try removing the drawer and checking for any obstructions. If you find any blockages, clean them thoroughly before inserting the drawer back into the washing machine. It's important to ensure that the drawer is fully seated in its slot to avoid any leaks or malfunctions during the washing cycle. For a detailed guide on how to clean the detergent drawer, you can refer to the instruction manual or seek online resources for step-by-step instructions.
Cause of Samsung Washing Machine 4C Error
The 4C error is a common error that can occur with Samsung washing machines, and it can indicate several issues with the water supply system. One of the reasons why you might see this error is if there is no cold water in the system. Another possible cause is a dirty or obstructed water inlet valve. This can happen if dirt or foreign objects get stuck inside. Poor connections for hot and cold water can also cause the 4C error, particularly during installation or when connecting to the water supply system. Low water pressure or no pressure at all in the water supply system can also trigger the error. Finally, if the detergent container is not properly connected to the hose, the 4C error may appear.
The 4C error in Samsung washing machines is a common issue that can occur due to various reasons. One of the primary causes of this error is a problem with the water supply. If there is a blockage or kink in the water supply hose, it can cause the machine to not generate a sufficient water supply. This can lead to a 4C error code being displayed on the machine. Additionally, a problem with the connections for hot and cold water can also cause the error to occur. A dirty or clogged water inlet valve can also be a culprit behind the 4C error. The valve can become clogged with dirt or foreign objects, causing a disruption in the water supply. Proper troubleshooting and maintenance can help prevent the error from occurring.
Samsung
Samsung Electronics Co., Ltd. is a multinational electronics corporation headquartered in Suwon, South Korea. It is the largest subsidiary of the Samsung Group, accounting for 70% of the group's revenue in 2012. Samsung Electronics has a significant role in the group's corporate governance due to cross-ownership. The company has assembly plants and sales networks in 74 countries and employs around 290,000 people.
Samsung Electronics is majority-owned by foreign investors, and as of 2019, it is the world's second-largest technology company by revenue. Its market capitalization stood at US$520.65 billion, making it the 12th largest in the world. Samsung Electronics initially produced electronic and electrical appliances such as televisions, calculators, refrigerators, air conditioners, and washing machines. However, in November 2016, the company recalled 2.8 million top-load washing machines sold between 2011 and 2016 due to safety concerns. The washing machine's top could unexpectedly detach from the chassis during use, leading to potential injuries. The recall affected customers in the United States and South Korea, and Samsung offered free repairs or refunds to affected customers.
What is Samsung Washing Machine 4C Error - FAQs
The 4C error code on Samsung washing machines indicates that the machine is unable to get enough water supply. This could be due to various reasons such as low water pressure, a kinked or blocked water hose, or a malfunctioning water inlet valve.
First, check if the water supply is properly connected and the tap is open. Make sure the water hose is not kinked or blocked. If the issue persists, check the water inlet valve and clean the filters. You can also try resetting the machine.
If the 4C error occurs during the rinse cycle, it could indicate a problem with the water supply or the water inlet valve. Check the water supply and make sure the water hose is not kinked or blocked. If the issue persists, it may be necessary to replace the water inlet valve.
To prevent the 4C error, make sure to clean the water hose mesh filter at least twice a year to prevent buildup. Also, check the water supply regularly to ensure it is functioning properly and the water pressure is between 0.5bar and 8bar.
If the 4C error persists, it may indicate a more serious issue with the washing machine, such as a faulty water inlet valve or control board. In this case, it is recommended to contact a professional repair technician to diagnose and fix the problem.